Packing specification
(original paint) 18kg / barrel, (curing agent) 3.5kg/barrel.
Technical indicators
The color and appearance of the paint film shall be flat and smooth, and the color shall meet the standard template
Fineness, μ m ≤20
Gloss (60 °)% ≥ 90
Hardness (pencil hardness) ≥ HB
Adhesion (cross cut method, 1mm), grade ≤ 1
Cupping test, mm ≥ 4
Flexibility, mm ≤ 2
Water resistance (immersion in class III water specified in GB / t6682 for 240h, 23 ± 2 ℃), no blistering, wrinkling and falling off, and slight discoloration and loss of light are allowed
Volatile oil resistance (immersed in 3# ordinary solvent oil of gb1922 for 2h, 23 ± 2 ℃), no foaming, wrinkling and falling off, and slight discoloration is allowed
Weather resistance (quv340 artificial accelerated aging, 800H) no cracking, discoloration ≤ grade 3, loss of light ≤ 60%
matters needing attention
1. Before use, mix the paint and curing agent according to the required proportion, mix as much as you use, and stir evenly. After 10-15 minutes, it is better to use it after filtering with 200 mesh screen, and use it up within 6 hours
2. The construction process shall be kept dry and clean. It is strictly prohibited to contact with water, acid, alcohol, alkali, etc. after the paint is prepared, the curing agent packaging barrel must be tightly covered to avoid gelling. During construction and drying, the relative humidity shall not be greater than 85%.
Matching paint
(primer) various colors of polyurethane antirust primer iron red high antirust primer
(intermediate coating) various colors of polyurethane intermediate coating paint gray intermediate coating paint
surface treatment
The painted surface shall be firm and clean, free of oil, dust and other dirt, and free of acid, alkali or moisture condensation. The polyurethane finish coat that has been cured for a long time can be coated only after it is roughened with sandpaper.
Coating reference
Ratio: Paint: h-11 curing agent = 4:1 (weight ratio) theoretical dosage: about 100-150g / ㎡
Construction time limit (23 ℃): 6H
Recommended number of coating courses: two coating courses (wet to wet), dry film thickness: 50 ± 5 μ m
Diluent: XLZ acrylic automotive paint diluent
Airless spraying
The nozzle diameter is about 0.4-0.5mm
Discharge pressure 15-25mpa
Painting times: 1 time
Ambient temperature and humidity: 15-35 ℃, 45-80%
Recommended dry film thickness 30-40 μ m
Air spraying
The nozzle diameter is about 1.5-2.5mm
Air pressure 0.4-0.6mpa
Painting times: 2 times
Ambient temperature and humidity: 15-35 ℃, 45-80%
Recommended dry film thickness 30-40 μ m
Recommended dry film thickness 30-40 μ m
Recommended dry film thickness 30-40 μ m
Storage and transportation
The product shall be stored in a cool, dry and ventilated place, directly exposed to sunlight, isolated from fire source and away from heat source. The storage period of paint is 12 months and that of curing agent is 12 months. During transportation, the products shall be protected from rain, sunlight and collision, and shall comply with the transportation regulations of the transportation department on dangerous chemicals.
